Surface preparation
Alltek
(An internal finish for walls & ceilings)
An internal finish for walls and ceilings designed to replace gypsum based plaster
• Alltek is supplied ready mixed for application by trowel or spray equipment
• No on site mixing machinery or water required.
• Suitable for fast track projects. Fast application and rapid drying out – reducing the programme time.
• Can normally be over coated 24 hours after last coat.
• The finish is smooth or textured, depending on application method.
• Textured ceilings do not require any further decoration or painting.
• Once cured the surface is ready for final decoration, apply one mist coat of Alltek First Coat followed by the specified topcoat.
• No wastage – Alltek will not dry out overnight when not used, simply cover material with water and leave for use the following day.
• Alltek has inherent flexibility and is less prone to cracking than traditional plaster.
• Virtually all types of surfaces can be covered to a uniform appearance e.g. glass, metal, painted wood, concrete and old tiling.
• Alltek absorbs moisture thus lessening the problem of condensation.
• Surfaces up to 3m above the floor level can be treated without the need for platforms or scaffolding.
• A trained team with one spray unit can complete 300-400m / day
• Water based, non-toxic, contains no asbestos fibres or other harmful ingredients.
• LOW VOC LEVELEasy-Key
(Universal waterproofing compound)
Universal waterproofing compound styrene butadiene co polymer latex that has been specifically designed for use in cement compositions
• A water-resistant render for interior or exterior walls or basements prior to finishing coat.
• As a leveling to floors prior to laying tiles, wood & blocks.
• To patch and repair concreted areas.
• As a waterproofing compound on flat roofs and balconies and retaining walls prior to a finishing product.
• As a screed for industrial flooring, bathrooms and showers.
ADVANTAGES:
• Adhesion to substrates, including dense impervious concrete.
• Resistance to water penetration.
• Tough and flexible.
• Resistance to certain chemicals.
• Slurry consistency therefore easy to apply by brush.
• Protects against salt penetration.
• Good anti-carbonation properties, non corrosive to steel and iron.
• LOW VOC LEVELEasy-Plast
(A quick drying plaster with strong adhesive properties)
Restyle, recreate, redesgn, redecorate. Easy-plast covers anything
Now you can cover any existing wall surface with a new screed that bonds perfectly with any material. You can then paint, plaster or coat as you please.
Easyplast is just that – the easiest way to plaster over bricks, ceramics, wood, metal, stone, polystyrene eifs systems, plastic, enamel, melamine and even glass.
Easy-plast represents significant savings because you don’t have to break, chip, sand or remove the existing substrate.
Offering excellent coverage, it effectively bonds permanently with the existing material, covering grouting, cracks and other imperfections.
A revolutionary way to, refurbish, renew, restyle or recover most surfaces, this easy to use screed is then coated with the product of your choice.
• Excellent adhesion properties
• Excellent over-coating properties
• Superior Alkali Resistance
• High degree of flexibility
• Impact resistance
• Good water resistance
• Water based, user and environmentally friendlyGeneral purpose waterproofing compound
(Universal waterproofing compound)
A durable membrane free waterproofing system suitable for multi surfaces
• Remove Suitable for masonry and cement plaster, parapets, boundary walls, bagged walls, flat roofs, flashing, galvanised roofs, metal, aluminium etc.
• Designed for interior and exterior use.
• Excellent adhesion to all suitably primed substrates.
• Excellent weather and ultraviolet resistance.
• Tough and durable.
• Superb flexibility with properties that allow for expansion and contraction to cover hairline cracks.
• Water based.
VOC LEVEL 4 g/L
Non hazardous, non toxic, and both environmentally and user friendly.Skimcoat
(Cementitious preparation plaster)
Cementitious preparation plaster formulated to face up off shtter concrete or any surface imperfections on substrates
Marmoran Skimcoat is a cementitious preparation plaster formulated to face up off shutter concrete, or any surface imperfection on substrates.
Characterised by its ease of application, this non shrink product may be over coated directly with conventional coatings. Marmoran Skimcoat may be applied by trowel, brush, and roller or sprayed to match surrounding surfaces.
FEATURES & BENEFITS
• Extremely hard and durable.
• Exceptional impact resistant.
• No shrinkage, hence one coat application of high film build is possible.
• Has excellent abrasion resistance.
• Hides surface imperfections.
• Superior adhesion to all suitably primed substrates.
• VOC LEVEL 0g/L
• Non-hazardous, non-toxic, and both environmentally and user friendly.Skimfill
(A ready for use and easy to apply acrylic preparation filler)
A fast rewady for use and easy to apply acrylic preparation filler and skimming plaster for interior and exterior surfaces
Marmoran Skimfill is water based easy to use preparation filler and skimming product.
It is used to fill surface imperfections such as cracks and blowholes and is also suitable for use on a wide variety of new or previously painted substrates to give a continuous smooth top quality finish prior to finishing coat. Marmoran Skimfill can be applied as thin as 0.1mm to zero the surface. Multiple coats can be applied at 1mm to 1.5mm per application.
FEATURES & BENEFITS
• Supplied ready for use, no need for on site mixing, no wastage
• Flexible, yet hard and durable
• Has good sanding properties
• Has excellent adhesion to most substrates
• Rapid drying properties, saves time
• Outstanding water resistance
• No need to prime once cured, ready for decoration
• LOW VOC LEVEL- 15 g/L
• Water based, low odour, non-hazardous, non-toxic, both environmentally and user friendlyStyrobond Sealer
(A milky additive for cement used to strengthen and increase adhesion)
SKIMMING AND SCREEDING: Seal surface by applying one coat of Styrobond thinned with 3 parts water. Allow to dry. Apply a second coat of Styrobond thinned with 2 parts water. When tacky, apply cement plaster or cretestone. To further aid adhesion of plaster, mix 5 Lt of Styrobond to each pocket of cement or cretestone.
BONDING: Coat each surface with Styrobond thinned with 3 parts water. Mix to a paste a solution of Styrobond thinned with 2 parts water, 2 parts cement and 2 parts fine sand. Apply to both surfaces and press together.
ADDITIVE: Mix 5 Lt of Styrobond to each pocket of cement. Styrobond greatly increases the adhesion and strength of concrete. It creates a waterproof, tough, hard wearing, dust free surface as well as increasing the resistance to acids and alkaline substances.
GROUTING: Mix 1 part Styrobond and 5 parts water to grouting mix.
CRACK FILLER: Cut out crack to form a vee and coat with unthinned Styrobond. Mix to a paste, a solution of Styrobond thinned with 2 parts water, 2 parts cement and 2 parts fine sand. Work well into crack and allow to dry thoroughly.
ADHESIVE: For wood, paper, cardboard, ceramics, apply Styrobond unthinned to both surfaces and clamp together until dry.Masonary filler
(Acrylic paste filler)
ACRYLIC PASTE FILLER USED TO FILL IMPERFECTIONS SUCH AS CRACKS AND BLOWHOLES OR TO RECTIFY UNEVEN SURFACES.
USES
Marmoran Masonry Filler may be used internally and externally to a variety of suitably prepared substrates
FEATURES & BENEFITS
Is flexible, yet extremely hard and durable.
Has excellent adhesion to most cementitious substrates.
Is resistant to saponification under alkaline conditions.
Has excellent abrasion and impact resistance.
Has good sanding properties.
LOW VOC LEVEL 13 g/L
Water based, non toxic, non hazardous, environment and user friendly.Marmocide & Marmoclean
(Antifungal disinfectant and cleaning agent)
MARMOCIDE Antifungal Disinfectant: is a highly efficient liquid micro biocide for disinfection and sterilisation, based on a combination of a tri-organic tin and an organic nitrogen compound. Marmoran Marmocide has a balanced broad spectrum activity against fungi, gram-positive and gram-negative bacteria, and green and blue algae. In the process of destroying algae, the colour is also diminished.
• Is effective across a wide temperature range.
• Is concentrated – dilutions up to 1:10 with water is possible
• Is a non-solvent disinfectant, and can replace traditional bleaches.
• Is highly efficient in destroying fungi and algae.
• Disinfects on a variety of surfaces, including very porous.
• Protects substrate after disinfecting.
MARMOCLEAN Synergistic detergent: is a highly efficient alkaline cleaning agent based on a high performance optimised surfactant blend intended for water based degreasing. Marmoran Marmoclean is designed to effectively remove most usual surface dirt and contaminants e.g. dirt, industrial pollution products, road dirt etc. Being a synergistic detergent Marmoran Marmoclean mode of action is to loosen and remove dirt from the substrate and to encapsulate same in a molecular cage. This is then removed with water.
• Highly efficient synergistic cleaning properties.
• Is environmentally friendly
• Is concentrated – dilutions up to 1: 10 with water is possible
• Is a non-solvent cleaner, and can replace traditional solvent cleaners
• Is a low alkaline cleaner – is user friendly
• Cleans both fats and oils and pigments.
• Cleaning performed at ambient temperaturesAnti graffiti thinners
(Used to thin the coating for spray applications)
• Thinning of Anti-Graffiti Top coat for spray applications
• Cleaning of brushes, roller and spray equipment.Anti graffiti cleaning agent
(Used to remove graffiti from the wall)
• Strong Graffiti cleaning solvent.
• Fast action.
• Dip/spray and wipe application.
• One step cleaning, additional wash steps not necessarily required.Universal undercoat
(A superior alkyd based universal undercoat for interior and exterior)
Excellent adhesion of topcoats.
Excellent adhesion to primers.
Provides a good gloss holdout.
Excellent over coating properties
Is totally non permeable with excellent water resistance
Excellent sanding properties
Matt finishUniversal primer
(Water based acrylic primer for high density substrates)
For interior & exterior use onto suitably prepared substrates
Specially formulated to suit a wide variety of surfaces including metal, wood and concrete
Contains anti corrosive pigments to arrest existing rust and prevent the formation of rust nodules
on steel surfaces, thereby affording long life protection to the steel structure
Inherent flexibility prevents cracking and flaking
Superior Alkali Resistance, will not blister
Controlled water vapour permeability enabling the substrate to “breathe”
Deep penetration for excellent adhesion
Excellent over coating properties
Rapid drying properties
Eco friendly, water based, LOW VOC LEVEL 16g/L
Supplied ready to useRed oxide steel primer
(A quick drying anti-corrosive primer)
For interior & exterior use onto suitably prepared metal substrates
Specially formulated to prime directly to steel
Contains anti corrosive pigments to arrest existing rust and prevent the formation of rust nodules
on steel surfaces, thereby affording long life protection to the steel structure
Inherent flexibility prevents cracking and flaking
Superior Alkali Resistance, will not blister
Excellent adhesion
Excellent over coating properties
Rapid drying properties
Eco friendly, water based, LOW VOC LEVEL 16g/L
Supplied ready to useRust converter
(Converts rust to a stable black protective coating)
Rust Converter is an acrylic water based coating
that reacts and converts rust to a stable black
protective coating that serves as an excellent primer
and rust neutralizer
The treatment allows the surface to be easily
overcoated
It reduces time, labour and scaffolding costs of rust
removal.
Ideal for iron and steel surfaces whose rust cannot
be fully removed
An excellent barrier to water vapour, oxygen and
Carbon Dioxide
Eco friendly, water based, LOW VOC LEVEL 24g/L
Made to order, supplied ready to use.
Brush, Roller & Spray application.Wood primer
(A quick drying primer for the protection of wood)
For interior and exterior on wood
Excellent adhesion
Excellent application properties
High hiding power and film build
Easy to apply with brush or roller
Can be overcoated with a wide range
of Marmoran Water and Solvent Based ProductsGalvanised primer
(Water based acrylic primer for galvanized iron)
For interior and exterior on Galvanised Iron and Mild Steel
Anti-corrosive containing a rust inhibitor
Excellent adhesion
Low odour
Low VOC
Easy to apply with brush or roller
Can be overcoated with a wide range of Marmoran Water and Solvent Based Products
