Rhinoglide

A SMOOTH SETTING COMPOUND

DESCRIPTION:
RHINOGLIDE is a quick setting drywall joint filler for patching, bedding and finishing. This product has been developed specifically to assist the drywall contractor to complete the jointing on jointing jobs within one day. Packed in 10 kg and 20 kg bags.

It is designed as a filler for plasterboard systems but can also be used as an interior crack filler and for fill-ing rough plaster surfaces prior to painting.

Coverage:
A 20 kg bag should be sufficient to finish completely approximately 35 - 40 m of joint. A 10 kg bag should be sufficient to finish completely approx. 17,5 - 20m of joint.

Mixing Instructions:
1. Do not add foreign matter to RHINOGLIDE.
2. To 460 ml of water add 1 kg of plaster. Use clean water only.
3. Add RHINOGLIDE to clean water and allow to soak for 10 minutes.
4. Stir slowly to a creamy texture. Do not overstir.
5. Do not mix more RHINOGLIDE than can be used in one hour.
6. Do not re-stir nor add more RHINOGLIDE or water to the mix after mixing is complete.
7. Clean utensils after each mix.

Application:
RHINOGLIDE is applied using the same tools and procedure as described in the Rhino Drywall Hand Jointing Application data sheet.

Note: Using RHINOGLIDE care should be taken whilst jointing to clean off excess compound and feather the edges of the joint. This will reduce sanding and disguise the joint better.