Flowcoat SF41 Stipple

PRODUCT DATA SHEET

Description
A chemical resistant solvent free high build epoxy stipple coating suitable for walls or floors.

Uses
Durable floor or wall coating in process factories, change houses, prisons, kitchen walls, police stations, mortuaries and hospitals.

Advantages
• Better wear and scuff resistance than smooth surface finishes.
• Easy to clean and bacteria resistant.
• Non staining and resistant to all industrial cleaning chemicals.
• Good acid and alkali resistance.
• Resistant to spillages of most industrial solvents including ethanol, methanol, Xylene, mineral turpentine, lacquer thinners, Xylene and petrol.
• Improves aesthetics of uneven plaster or floor finishes.
• Less slippery than smooth finish flooring.
• Solvent free.

Preparation
All surfaces must be clean, sound, laitance and dust free and have a maximum moisture content of 4%. Concrete surfaces to be prepared by abrasive blasting or grinding to achieve a profile similar to medium grit sand paper. The use of Ivory Concrete Etchant should only be considered as a last resort and should be discussed with Ivory’s Technical department as to the suitability and procedure. Badly pitted or eroded surfaces may require equalising with an Ivory scraper coat or alternatively Ivory 1000. Blow holes, omegas or cracks can be filled with Ivory 319 or Ivory 319TAQ quickset epoxy compound.

Priming
Prime floors and walls with Flowprime at a spread rate of 6m²/L.

Specification
Prepare prime surfaces and apply Flowcoat SF41 Stipple all in accordance with the manufacturers detailed instructions.

                                                                                                                                                                                        www.flowcrete.com