Mondèco Classic (8mm)

PRODUCT DATA SHEET

Description
Mondéco Classic is a seamless epoxy resin terrazzo floor finish.
Aggregate: Marble

Uses
Mondéco Seamless Terrazzo is suitable for airport and railway terminals, shopping centres, hotels, restaurants, and environments where design, chemical resistance
and durability are of paramount concern.

Benefits
Aesthetically pleasing - enhances the working environment
Seamless finish (except for underlying slab joints)
Easy to clean and maintain
Abrasion resistant
25 year Guarantee

Project References
Henry Moore Art Gallery – Leeds, UK; Planet Hollywood, Cannes, France; Karen Millen, Sweden; Euro Disney; Hanley market; BT Oswestry; Café Grand Prix, London; Sharjah Mega Mall, UAE.

Life Expectancy
25 years, subject to correct maintenance regime.

Pick and Mix
Pick your resin matrix colour and select one of the eight aggregate blends to obtain a unique floor finish. For the full range of resin matrix colours see the Mondéco crystal data sheet.
 

Examples of resin matrix colours used in conjunction with Classic Aggregate blends


The applied colours may differ slightly from the examples shown above.
Contact our customer services for a true colour sample or a special colour match
.

       

Model Specification
Product: Mondéco Classic
Finish: Semi gloss
Thickness: 8mm
Preparatory work and application in accordance with manufacturers instructions.

Installation Service
The installation should be carried out by a Flowcrete approved contractor with a documented quality assurance scheme. Obtain details of our approved contractors by contacting our customer service team or enquiring via our web site www.flowcrete.com

Products Included in this System
Primer: Flowprime @ 0.25 kg/m2
Topping: Mondéco Classic (average density 2.25 kg/l) @ 22.5kg/m2 - (Applied at 10 mm, ground down to 8 mm).
Grout: Mondéco Coloured Grout @ 0.1 kg/m2
Sealers: Flowseal LS10 @ 0.1 kg/m2
Detailed application instructions are available upon request.

Focus on the Floorzone
Flowcrete Group plc are world leaders in specialist industrial and commercial flooring. Systems available include: underfloor heating systems, floor screeds, surface damp proof membranes,
decorative floor finishes, seamless terrazzo, car park deck waterproofing, corrosion resistant systems… to name just a few. Our objective is to satisfy your Floorzone needs.

Flooring Design Service
Special corporate colours and designs can be produced to special order.

Microbial / Fungal Resistance
At an additional cost, Ultra-Fresh® antimicrobial additive can be incorporated into Mondéco to provide control of most bacteria and fungi which come into contact with the floor.
      Ultra-Fresh® is the registered trademark of Thomson Research Associates.

Substrate Requirements
Concrete or screed substrate should be a minimum of 25 N/mm2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS8204 and free from
rising damp and ground water pressure. If no damp proof membrane is present Hydraseal DPM can be incorporated directly beneath the Mondéco system.

Important Note
Flowcrete’s products are guaranteed against defective materials and manufacture and are sold subject to its standard Terms and Conditions of Sale, copies of which can be obtained on request.

System Performance Guide
Complies with BS 8204-6/FeRFA category 5.
The table below shows how well the system complies with different characteristics.
A scale of 1 - 5 where 5 is the best value.
5 Excellent, 4 Very good, 3 Good (Pass), 2 Fair, 1 Poor

Fire Safety 4 Impermeability 5
Slip resistance 3 Clean ability 5
Impact resistance 5 Wear resistance 5
Thermal resistance 3 Chemical resistance 4
Heavy traffic 5 Scratch resistance 5

Technical information
The figures that follow are typical properties achieved in laboratory tests at 20
°C and at 50% Relative Humidity.

Fire Resistance
 
BS476: Part 7
Spread of flame class 2
Slip Resistance TRRL Pendulum Slip Test
Dry 80
Temperature Resistance
 
Tolerant of sustained temperature up to 60 °C
Water Permeability Nil – Karsten test (impermeable)
Chemical Resistance Go to www.flowcrete.com
Abrasion Resistance BS 8204:Part 2:2002
Class AR2 - Medium duty industrial and commercial
Compressive Strength > 65 N/mm2 (BS 6319)
Flexural Strength 25 N/mm2 (BS 6319)
Tensile Strength 13 N/mm2 (BS 6319)
Bond Strength Greater than cohesive strength of
25 N/mm2 concrete. > 1.5 MPa.

Speed of cure

  10°C 20°C 30°C
Light traffic 24hrs 16hrs 10hrs
Full traffic 72hrs 48hrs 36hrs
Full chemical cure 12 days 7 days 7 days

Aftercare - Cleaning and Maintenance
Clean regularly using a single or double headed rotary scrubber drier in conjunction with a mildly alkaline detergent.

Environmental considerations
The finished system is assessed as non-hazardous to health and the environment. The long service life and seamless surface reduce the need for repairs, maintenance and cleaning.
Environmental and health considerations are controlled during manufacture and application of the products by Flowcrete staff and fully trained and experienced contractors.

Flowcrete SA (PTY) LTD
Co. Reg. No. 2003/029560/07
   
KWA-ZULU NATAL
PO BOX 12241, Jacobs, 4026, South Africa
GAUTENG
PO BOX 942, Kempton Park, 1620 South Africa
CAPE TOWN
25 Woodley Road, Plumbstead, South Africa
Tel: (031) 461 3411
Fax: (031) 461 3475
Tel: (011) 394 1980
Fax: (011) 394 3003
Tel: (021) 797 0214
Fax: (021) 797 0214
Email: southafrica@flowcrete.com
Flowcrete SA (Pty) Ltd is a division of Flowcrete international

                                                                                                                                                                                        www.flowcrete.com