Generally used in the following
applications:
|
|
| - |
Offices |
25-30mm |
| - |
Domestic ceilings |
25-30mm |
|
|
Advantages of using ISOBOARD®:
|
|
| - |
Aesthetically pleasing. |
| - |
Can be painted with good quality acrylic PVA. |
| - |
Does not absorb water. |
| - |
Effective thermal insulator. |
| - |
Retards heat flow effectively for roof space
temperatures over
50°C. |
| - |
Board thickness installed depends on required
room temperatures. |
| - |
ISOBOARD® is easy to install and
contains no toxic gases.
|
|
|
Nailed up ceiling installation Instructions:
|
|
| - |
Use tongue and groove beveled boards fitted
from wall to wall. (Boards with V-grooves at
200mm or 600mm centers can be provided) |
| - |
Apply 5ml "blobs" of adhesive,
spaced at 200mm centers to brandering before
fitting boards. |
| - |
Fix board to sub-frame using battens spaced at
a max of 700mm. (20mm boards, 500mm) |
| - |
Use ceiling clips for concealed fastening and
use posi-drive screws with washers for
additional fixing on edges. The ceiling clips to
be pushed in on the tongue side. |
| - |
Must be painted. Use two coats of good quality
acrylic PVA paint. |
| - |
For lamp fittings with globe near board, use
low energy lamps, maximum temperature 70°C.
|
|
|
