|
Eclipse
|
High
Performance floorcovering for demanding commercial locations.
Non-directional homogeneous through chip construction for lasting
performance and appearance.
|
Marley
Pro-Tech Polyurethane Factory Finish for improved resistance to soiling
and ease of maintenance.
|
Product data
|
Thickness
(EN 428)
Colour range
20
Residual indention (EN 425)
Excellent recovery from indentation exceeding requirements
Castor wheel test (EN 425)
Adequate for intensive use
Abrasion resistance (EN 660-2)
Group P
Flammability (pr EN ISO 13501:2001)
BFL.S1
ASTM E648 -
Category 1 (critical radiant flux)
Australian fire test: AS 1530.3 16, 0, 2, 7
Epiradiateur: M3
Smoke emission
NORTEST NT FIRE 007 (Scandinavia) Class L
VOC Emission NT Build 358
-
below detection level.
|
Colour fastness (EN ISO 105-B02: 1999)
Minimum Standard 7.
Chemical resistance
Good resistance to everyday substances. Advice is available on resistance
to specific chemicals.
Thermal conductivity (DIN 52612)
0.24W/mK
Classification (EN 685)
Location usage group 34 and 43.
Satisfies the performance requirements advised within
HTM 61 for use in hospitals and other health
buildings.
Agrement
Certificate No. 98/3452. |
|
Typical
areas of use
Heavy traffic areas such as hospitals, schools, commercial buildings,
retail outlets, restaurants and hotels etc.
Installation
Marley Eclipse should be installed in accordance with
British
Standard 8203: 2001. Subfloors must be smooth, hard, clean and dry before
laying. Uneven, solid or suspended timber subfloors may need preparation
to meet the required standard. An effective DPM must be included in concrete
subfloors next to the ground. In underfloor heating applications, the
surface of the subfloor should not exceed 27°C. Marley Eclipse sheet must
be allowed to relax for 24 hours in a room temperature between 18°C and
25°C prior to installation. Marley Eclipse should be hot air seam welded
using Marley Welding Rod and perimeter sealed for a smooth, hygienic,
impervious finish in GSws locations. Marley Eclipse should be installed
using the appropriate Marley recommended adhesive, Marley Embond 170,
Marley Embond 168, Marley Embond 212, Marley Embond 138 (for hot climates)
and Marley Embond 401.
|
Maintenance
Marley Pro-Tech Polyurethane Factory Finish protects the surface from
dirt pick-up, scuffing and marking during product installaticn and in
the interim handover
period. Maintenance
is by way of a combination of spray buffing and dry buffing. For conventional
manual
maintenance procedures,
additional protection against
abrasion, chemicals
or staining, a floor finish may be applied to suit the demands of the
location. A more
detailed maintenance programme is
available on
request.
Guarantee
Marley Eclipse is guaranteed for 10 years against defective material,
provided that it is specified, installed and maintained
in accordance with our recommendations.
Technical
Services
Comprehensive
advice on selection, specification,
installation, performance and maintenance is available.
As Marley Floors operates a programme of continuous product improvement,
we reserve the right to amend technical performance of our products without
notice.
|
 BE 26 Ice |
 BE 46 May Green |
 BE 34 Aquamarine |
 BE 30 Cranberry |
 BE 14 Granite |
 BE 04 Peach |
 BE 32 Jade |
 BE02 Cappucchino |
 BE 12 Jet |
 BE 18 Terracotta |
 BE 44 Fresh Orange |
 BE 06 Clay |
 BE 38 Cornflower |
 BE 40 Citrus |
 BE 28 Sunflower |
 BE 08 Honey |
 BE 16 Azure |
 BE 42 Monaco Blue |
 BE 48 Amethyst |
 BE 36 Chamois |
Export Department
Johannesburg
(011) 681 4500
FLOORING |
A
Division of Marley (SA) (Pty) Ltd. Reg. No.53/00406/07
Head Office (011) 681-4500 · Bloemfontein (051) 434-2331 ·
Cape Town (021) 951-2351
Durban (031) 469-0264 George (044) 873-2833 Gauteng (011) 908-5500
East London (043) 745 1019
Also available from:
Marley (Namibia) (Pty) Ltd. (0926461)23-7200
Contract Supplies (Botswana) (09267) 30-9650