COMMUNICATION
CORPORATE PROFILE
PRODUCTS
TECHNOLOGY
DISTRIBUTORS
SITE MAP
CONTACT

MSDS1 DATA SHEET
MSDS2 DATA SHEET

 

MSDS2

MATERIAL SAFETY DATA SHEET

 

INSULFELT; INSULBOARD; INSULMATT; FIREBOARD; LOOSE WOOL;
RIGID PIPE SECTION; CULTIWOOL

Owens-Corning SA (Pty) Ltd                                All hours Tel no: (011) 813-1226
Iron Rd, New Era, Springs, South Africa               Fax: (011) 813-4414

1. Product Identification:

2. Composition:

Chemical name: Fibrous slag

Chemical family: Aluminosilicate slag                    Synonyms: Rock/slag fibre insulation

Fibrous slag wool with thermosetting phenol/formaldehyde resin

3. Hazard identification:

4. First Aid Measures:

Main  hazard: Temporary mechanical irritation and itching on skin and eye contact. Temporary irritation of upper airways

Health effects - ingestion: None

Flammability: Non-flammable

Eye contact: Rinse eye with clean tepid water for 10 minutes or until irritation ceases

Skin contact: Wash gently with lukewarm water and soap

Inhalation or ingestion: None

5. Fire Fighting Measures:

6. Accidental Release Measures:

Combustion products of binder: carbon dioxide, carbon monoxide, other hydrocarbons and water.

Extinguishing media: water, foam, carbon dioxide, dry powder

Protective clothing: Firefighters entering an area where fibrous slag is present, must wear full protective gear, including eye and respiratory protection

Small spills: Use a vacuum cleaner

Large spills: Spray with water to suppress dust. Collect wet material with shovels or front-end loader

Never use compressed air to clean an area where fibrous slag has been spilt

7. Handling and Storage:

8. Exposure Control/Personal Protection:

Handling/storage precautions: Store and handle in a manner that prevents spread of airborne fibrous slag dust in the workplace.

Occupational exposure limit: Recommended limit 2 fibres/ml air (Act 85 of 1993)

Engineering control measures: Local exhaust ventilation with hood; or process enclosure, to contain dust

Respiratory protection: FF1 type respiratory protection mask

Hand protection: Gloves may be worn

Eye protection: Protective goggles when working at or above shoulder height

Skin protection: Loose-fitting overalls

9. Physical and Chemical Properties:

10. Stability and Reactivity:

Appearance: Fibrous insulation wool in rolls

Odour: None

pH: 6 - 9

Melting point: Becomes increasingly fluid from 1000°C upwards

Flammability: None

Explosive properties: None

Oxidising properties: None

Density: SG 2,5

Solubility: Insoluble in water and chemical solvents

Product is stable

 

11. Toxicological information:

12. Ecological Information:

Acute toxicity: None

Skin, eye and upper airway contact: Transient irritation

Carcinogenicity: Not described in man

Biodegradability: Dissolves slowly in physiological solutions; otherwise persistent

No known adverse environmental effects

13. Disposal Considerations:

14. Transport information:

Dispose of in non-toxic waste landfill

Handle so as to limit dust generation

Transport in closed packaging or container to limit escape of fibrous dust

15. Regulatory information:

16. Other information:

South African Legislation: Occupational Health and Safety Act; Hazardous Chemical Substances Regulations - recommended occupational exposure limit 2 fibre/ml air

Fibrous slag insulation is safe when handled correctly

This material safety data sheet is in accordance with the General Administrative Regulations of the

Occupational Health and Safety Act, 1993. Date compiled: April 1997